8. Distributed locks and synchronizers
Redis based distributed reentrant Lock object for Java and implements Lock interface. Uses pub/sub channel to notify other threads across all Redisson instances waiting to acquire a lock.
If Redisson instance which acquired lock crashes then such lock could hang forever in acquired state. To avoid this Redisson maintains lock watchdog, it prolongs lock expiration while lock holder Redisson instance is alive. By default lock watchdog timeout is 30 seconds and can be changed through Config.lockWatchdogTimeout setting.
leaseTime parameter during lock acquisition can be defined. After specified time interval locked lock will be released automatically.
RLock object behaves according to the Java Lock specification. It means only lock owner thread can unlock it otherwise IllegalMonitorStateException would be thrown. Otherwise consider to use RSemaphore object.
Code example:
RLock lock = redisson.getLock("myLock");
// traditional lock method
lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
try {
...
} finally {
lock.unlock();
}
}Code example of Async interface usage:
RLock lock = redisson.getLock("myLock");
RFuture<Void> lockFuture = lock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
// ...
lock.unlockAsync();
});Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RLockReactive lock = redisson.getLock("myLock");
Mono<Void> lockMono = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RLockRx lock = redisson.getLock("myLock");
Completable lockRes = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Redis based distributed reentrant fair Lock object for Java implements Lock interface.
Fair lock guarantees that threads will acquire it in is same order they requested it. All waiting threads are queued and if some thread has died then Redisson waits its return for 5 seconds. For example, if 5 threads are died for some reason then delay will be 25 seconds.
If Redisson instance which acquired lock crashes then such lock could hang forever in acquired state. To avoid this Redisson maintains lock watchdog, it prolongs lock expiration while lock holder Redisson instance is alive. By default lock watchdog timeout is 30 seconds and can be changed through Config.lockWatchdogTimeout setting.
leaseTime parameter during lock acquisition can be defined. After specified time interval locked lock will be released automatically.
RLock object behaves according to the Java Lock specification. It means only lock owner thread can unlock it otherwise IllegalMonitorStateException would be thrown. Otherwise consider to use RSemaphore object.
Code example:
RLock lock = redisson.getFairLock("myLock");
// traditional lock method
lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
try {
...
} finally {
lock.unlock();
}
}Code example of Async interface usage:
RLock lock = redisson.getFairLock("myLock");
RFuture<Void> lockFuture = lock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
// ...
lock.unlockAsync();
});Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RLockReactive lock = redisson.getFairLock("myLock");
Mono<Void> lockMono = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RLockRx lock = redisson.getFairLock("myLock");
Completable lockRes = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Redis based distributed MultiLock object allows to group Lock objects and handle them as a single lock. Each RLock object may belong to different Redisson instances.
If Redisson instance which acquired MultiLock crashes then such MultiLock could hang forever in acquired state. To avoid this Redisson maintains lock watchdog, it prolongs lock expiration while lock holder Redisson instance is alive. By default lock watchdog timeout is 30 seconds and can be changed through Config.lockWatchdogTimeout setting.
leaseTime parameter during lock acquisition can be defined. After specified time interval locked lock will be released automatically.
MultiLock object behaves according to the Java Lock specification. It means only lock owner thread can unlock it otherwise IllegalMonitorStateException would be thrown. Otherwise consider to use RSemaphore object.
Code example:
RLock lock1 = redisson1.getLock("lock1");
RLock lock2 = redisson2.getLock("lock2");
RLock lock3 = redisson3.getLock("lock3");
RLock multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
// traditional lock method
multiLock.lock();
// or acquire lock and automatically unlock it after 10 seconds
multiLock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
boolean res = multiLock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
try {
...
} finally {
multiLock.unlock();
}
}Code example of Async interface usage:
RLock lock1 = redisson1.getLock("lock1");
RLock lock2 = redisson2.getLock("lock2");
RLock lock3 = redisson3.getLock("lock3");
RLock multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
RFuture<Void> lockFuture = multiLock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = multiLock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = multiLock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
// ...
multiLock.unlockAsync();
});Code example of Reactive interface usage:
RedissonReactiveClient anyRedisson = redissonClient.reactive();
RLockReactive lock1 = redisson1.getLock("lock1");
RLockReactive lock2 = redisson2.getLock("lock2");
RLockReactive lock3 = redisson3.getLock("lock3");
RLockReactive multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
Mono<Void> lockMono = multiLock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = multiLock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = multiLock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
// ...
})
.doFinally(multiLock.unlock())
.subscribe();Code example of RxJava3 interface usage:
RedissonRxClient anyRedisson = redissonClient.rxJava();
RLockRx lock1 = redisson1.getLock("lock1");
RLockRx lock2 = redisson2.getLock("lock2");
RLockRx lock3 = redisson3.getLock("lock3");
RLockRx multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
Completable lockRes = multiLock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = multiLock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = multiLock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
// ...
})
.doFinally(multiLock.unlock())
.subscribe();This object is deprecated. Use RLock or RFencedLock instead.
Redis based distributed reentrant ReadWriteLock object for Java implements ReadWriteLock interface. Both Read and Write locks implement RLock interface.
Multiple ReadLock owners and only one WriteLock owner are allowed.
If Redisson instance which acquired lock crashes then such lock could hang forever in acquired state. To avoid this Redisson maintains lock watchdog, it prolongs lock expiration while lock holder Redisson instance is alive. By default lock watchdog timeout is 30 seconds and can be changed through Config.lockWatchdogTimeout setting.
Also Redisson allow to specify leaseTime parameter during lock acquisition. After specified time interval locked lock will be released automatically.
RLock object behaves according to the Java Lock specification. It means only lock owner thread can unlock it otherwise IllegalMonitorStateException would be thrown. Otherwise consider to use RSemaphore object.
Code example:
RReadWriteLock rwlock = redisson.getReadWriteLock("myLock");
RLock lock = rwlock.readLock();
// or
RLock lock = rwlock.writeLock();
// traditional lock method
lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
try {
...
} finally {
lock.unlock();
}
}Code example of Async interface usage:
RReadWriteLock rwlock = redisson.getReadWriteLock("myLock");
RLock lock = rwlock.readLock();
// or
RLock lock = rwlock.writeLock();
RFuture<Void> lockFuture = lock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
// ...
lock.unlockAsync();
});Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RReadWriteLockReactive rwlock = redisson.getReadWriteLock("myLock");
RLockReactive lock = rwlock.readLock();
// or
RLockReactive lock = rwlock.writeLock();
Mono<Void> lockMono = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RReadWriteLockRx rwlock = redisson.getReadWriteLock("myLock");
RLockRx lock = rwlock.readLock();
// or
RLockRx lock = rwlock.writeLock();
Completable lockRes = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Redis based distributed Semaphore object for Java similar to Semaphore object.
Could be initialized before usage, but it's not requirement, with available permits amount through trySetPermits(permits) method.
Code example:
RSemaphore semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
semaphore.acquire();
// or acquire 10 permits
semaphore.acquire(10);
// or try to acquire permit
boolean res = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
boolean res = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
boolean res = semaphore.tryAcquire(10);
// or try to acquire 10 permits or wait up to 15 seconds
boolean res = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
if (res) {
try {
...
} finally {
semaphore.release();
}
}Code example of Async interface usage:
RSemaphore semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
RFuture<Void> acquireFuture = semaphore.acquireAsync();
// or acquire 10 permits
RFuture<Void> acquireFuture = semaphore.acquireAsync(10);
// or try to acquire permit
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync();
// or try to acquire permit or wait up to 15 seconds
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(10);
// or try to acquire 10 permits or wait up to 15 seconds
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(10, 15, TimeUnit.SECONDS);
acquireFuture.whenComplete((res, exception) -> {
// ...
semaphore.releaseAsync();
});Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RSemaphoreReactive semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
Mono<Void> acquireMono = semaphore.acquire();
// or acquire 10 permits
Mono<Void> acquireMono = semaphore.acquire(10);
// or try to acquire permit
Mono<Boolean> acquireMono = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Mono<Boolean> acquireMono = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
Mono<Boolean> acquireMono = semaphore.tryAcquire(10);
// or try to acquire 10 permits or wait up to 15 seconds
Mono<Boolean> acquireMono = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireMono.doOnNext(res -> {
// ...
})
.doFinally(semaphore.release())
.subscribe();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RSemaphoreRx semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
Completable acquireRx = semaphore.acquire();
// or acquire 10 permits
Completable acquireRx = semaphore.acquire(10);
// or try to acquire permit
Single<Boolean> acquireRx = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Single<Boolean> acquireRx = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
Single<Boolean> acquireRx = semaphore.tryAcquire(10);
// or try to acquire 10 permits or wait up to 15 seconds
Single<Boolean> acquireRx = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireRx.doOnSuccess(res -> {
// ...
})
.doFinally(semaphore.release())
.subscribe();Redis based distributed Semaphore object for Java with lease time parameter support for each acquired permit. Each permit identified by own id and could be released only using its id.
Should be initialized before usage with available permits amount through trySetPermits(permits) method. Allows to increase/decrease number of available permits through addPermits(permits) method.
Code example:
RPermitExpirableSemaphore semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
semaphore.trySetPermits(23);
// acquire permit
String id = semaphore.acquire();
// or acquire permit with lease time in 10 seconds
String id = semaphore.acquire(10, TimeUnit.SECONDS);
// or try to acquire permit
String id = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
String id = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
String id = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
if (id != null) {
try {
...
} finally {
semaphore.release(id);
}
}Code example of Async interface usage:
RPermitExpirableSemaphore semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
RFuture<Boolean> setFuture = semaphore.trySetPermitsAsync(23);
// acquire permit
RFuture<String> acquireFuture = semaphore.acquireAsync();
// or acquire permit with lease time in 10 seconds
RFuture<String> acquireFuture = semaphore.acquireAsync(10, TimeUnit.SECONDS);
// or try to acquire permit
RFuture<String> acquireFuture = semaphore.tryAcquireAsync();
// or try to acquire permit or wait up to 15 seconds
RFuture<String> acquireFuture = semaphore.tryAcquireAsync(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
RFuture<String> acquireFuture = semaphore.tryAcquireAsync(10, 15, TimeUnit.SECONDS);
acquireFuture.whenComplete((id, exception) -> {
// ...
semaphore.releaseAsync(id);
});Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RPermitExpirableSemaphoreReactive semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
Mono<Boolean> setMono = semaphore.trySetPermits(23);
// acquire permit
Mono<String> acquireMono = semaphore.acquire();
// or acquire permit with lease time in 10 seconds
Mono<String> acquireMono = semaphore.acquire(10, TimeUnit.SECONDS);
// or try to acquire permit
Mono<String> acquireMono = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Mono<String> acquireMono = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
Mono<String> acquireMono = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireMono.flatMap(id -> {
// ...
return semaphore.release(id);
}).subscribe();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RPermitExpirableSemaphoreRx semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
Single<Boolean> setRx = semaphore.trySetPermits(23);
// acquire permit
Single<String> acquireRx = semaphore.acquire();
// or acquire permit with lease time in 10 seconds
Single<String> acquireRx = semaphore.acquire(10, TimeUnit.SECONDS);
// or try to acquire permit
Maybe<String> acquireRx = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Maybe<String> acquireRx = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
Maybe<String> acquireRx = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireRx.flatMap(id -> {
// ...
return semaphore.release(id);
}).subscribe();Redis based distributed CountDownLatch object for Java has structure similar to CountDownLatch object.
Should be initialized with count by trySetCount(count) method before usage.
Code example:
RCountDownLatch latch = redisson.getCountDownLatch("myCountDownLatch");
latch.trySetCount(1);
// await for count down
latch.await();
// in other thread or JVM
RCountDownLatch latch = redisson.getCountDownLatch("myCountDownLatch");
latch.countDown();Code example of Async interface usage:
RCountDownLatch latch = redisson.getCountDownLatch("myCountDownLatch");
RFuture<Boolean> setFuture = lock.trySetCountAsync(1);
// await for count down
RFuture<Void> awaitFuture = latch.awaitAsync();
// in other thread or JVM
RCountDownLatch latch = redisson.getCountDownLatch("myCountDownLatch");
RFuture<Void> countFuture = latch.countDownAsync();Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RCountDownLatchReactive latch = redisson.getCountDownLatch("myCountDownLatch");
Mono<Boolean> setMono = latch.trySetCount(1);
// await for count down
Mono<Void> awaitMono = latch.await();
// in other thread or JVM
RCountDownLatchReactive latch = redisson.getCountDownLatch("myCountDownLatch");
Mono<Void> countMono = latch.countDown();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RCountDownLatchRx latch = redisson.getCountDownLatch("myCountDownLatch");
Single<Boolean> setRx = latch.trySetCount(1);
// await for count down
Completable awaitRx = latch.await();
// in other thread or JVM
RCountDownLatchRx latch = redisson.getCountDownLatch("myCountDownLatch");
Completable countRx = latch.countDown();Redis based distributed reentrant SpinLock object for Java and implements Lock interface.
Thousands or more locks acquired/released per short time interval may cause reaching of network throughput limit and Redis CPU overload because of pubsub usage in Lock object. This occurs due to nature of Redis pubsub - messages are distributed to all nodes in Redis cluster. Spin Lock uses Exponential Backoff strategy by default for lock acquisition instead of pubsub channel.
If Redisson instance which acquired lock crashes then such lock could hang forever in acquired state. To avoid this Redisson maintains lock watchdog, it prolongs lock expiration while lock holder Redisson instance is alive. By default lock watchdog timeout is 30 seconds and can be changed through Config.lockWatchdogTimeout setting.
leaseTime parameter during lock acquisition can be defined. After specified time interval locked lock will be released automatically.
RLock object behaves according to the Java Lock specification. It means only lock owner thread can unlock it otherwise IllegalMonitorStateException would be thrown. Otherwise consider to use RSemaphore object.
Code example:
RLock lock = redisson.getSpinLock("myLock");
// traditional lock method
lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
try {
...
} finally {
lock.unlock();
}
}Code example of Async interface usage:
RLock lock = redisson.getSpinLock("myLock");
RFuture<Void> lockFuture = lock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
// ...
lock.unlockAsync();
});Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RLockReactive lock = redisson.getSpinLock("myLock");
Mono<Void> lockMono = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RLockRx lock = redisson.getSpinLock("myLock");
Completable lockRes = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
// ...
})
.doFinally(lock.unlock())
.subscribe();Redis based distributed reentrant FencedLock object for Java and implements Lock interface.
This type of lock maintains the fencing token to avoid cases when Client acquired the lock was delayed due to long GC pause or other reason and can't detect that it doesn't own the lock anymore. To resolve this issue token is returned by locking methods or getToken() method. Token should be checked if it's greater or equal with the previous one by the service guarded by this lock and reject operation if condition is false.
If Redisson instance which acquired lock crashes then such lock could hang forever in acquired state. To avoid this Redisson maintains lock watchdog, it prolongs lock expiration while lock holder Redisson instance is alive. By default lock watchdog timeout is 30 seconds and can be changed through Config.lockWatchdogTimeout setting.
leaseTime parameter during lock acquisition can be defined. After specified time interval locked lock will be released automatically.
RLock object behaves according to the Java Lock specification. It means only lock owner thread can unlock it otherwise IllegalMonitorStateException would be thrown. Otherwise consider to use RSemaphore object.
Code example:
RFencedLock lock = redisson.getFencedLock("myLock");
// traditional lock method
Long token = lock.lockAndGetToken();
// or acquire lock and automatically unlock it after 10 seconds
token = lock.lockAndGetToken(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Long token = lock.tryLockAndGetToken(100, 10, TimeUnit.SECONDS);
if (token != null) {
try {
// check if token >= old token
...
} finally {
lock.unlock();
}
}Code example of Async interface usage:
RFencedLock lock = redisson.getFencedLock("myLock");
RFuture<Long> lockFuture = lock.lockAndGetTokenAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Long> lockFuture = lock.lockAndGetTokenAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
RFuture<Long> lockFuture = lock.tryLockAndGetTokenAsync(100, 10, TimeUnit.SECONDS);
long threadId = Thread.currentThread().getId();
lockFuture.whenComplete((token, exception) -> {
if (token != null) {
try {
// check if token >= old token
...
} finally {
lock.unlockAsync(threadId);
}
}
});Code example of Reactive interface usage:
RedissonReactiveClient redisson = redissonClient.reactive();
RFencedLockReactive lock = redisson.getFencedLock("myLock");
Mono<Long> lockMono = lock.lockAndGetToken();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Long> lockMono = lock.lockAndGetToken(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Mono<Long> lockMono = lock.tryLockAndGetToken(100, 10, TimeUnit.SECONDS);
long threadId = Thread.currentThread().getId();
lockMono.doOnNext(token -> {
if (token != null) {
try {
// check if token >= old token
...
} finally {
lock.unlock(threadId);
}
}
})
.subscribe();Code example of RxJava3 interface usage:
RedissonRxClient redisson = redissonClient.rxJava();
RFencedLockRx lock = redisson.getFencedLock("myLock");
Single<Long> lockRes = lock.lockAndGetToken();
// or acquire lock and automatically unlock it after 10 seconds
Single<Long> lockRes = lock.lockAndGetToken(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds
// and automatically unlock it after 10 seconds
Single<Long> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
long threadId = Thread.currentThread().getId();
lockRes.doOnSuccess(token -> {
if (token != null) {
try {
// check if token >= old token
...
} finally {
lock.unlock(threadId);
}
}
})
.subscribe();