Releases: rqlite/rqlite
v8.23.0
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.23.0 adds support for the RETURNING keyword, as well as other minor improvements. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.23.0/rqlite-v8.23.0-linux-amd64.tar.gz -o rqlite-v8.23.0-linux-amd64.tar.gz
tar xvfz rqlite-v8.23.0-linux-amd64.tar.gz
cd rqlite-v8.23.0-linux-amd64
./rqlited ~/node.1
macOS
Install via Homebrew.
brew install rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.22.2
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.22.2 fixes a rare Node Recovery restart issue, along with some other small improvements. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.22.2/rqlite-v8.22.2-linux-amd64.tar.gz -o rqlite-v8.22.2-linux-amd64.tar.gz
tar xvfz rqlite-v8.22.2-linux-amd64.tar.gz
cd rqlite-v8.22.2-linux-amd64
./rqlited ~/node.1
macOS
brew install rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.22.1
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.22.1 fixes a potential restart issue related to nodes that are down for an extended period. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.22.1/rqlite-v8.22.1-linux-amd64.tar.gz -o rqlite-v8.22.1-linux-amd64.tar.gz
tar xvfz rqlite-v8.22.1-linux-amd64.tar.gz
cd rqlite-v8.22.1-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.22.0
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.22.0 adds new support for handling BLOB data. Check out the documentation for more details. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.22.0/rqlite-v8.22.0-linux-amd64.tar.gz -o rqlite-v8.22.0-linux-amd64.tar.gz
tar xvfz rqlite-v8.22.0-linux-amd64.tar.gz
cd rqlite-v8.22.0-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.21.3
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.21.3 addresses an edge case during node start-up that could result in a panic. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.21.3/rqlite-v8.21.3-linux-amd64.tar.gz -o rqlite-v8.21.3-linux-amd64.tar.gz
tar xvfz rqlite-v8.21.3-linux-amd64.tar.gz
cd rqlite-v8.21.3-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.21.2
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.21.2 fixes a minor issue related to the permissions set on the SQLite file, after a Boot operation completes. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.21.2/rqlite-v8.21.2-linux-amd64.tar.gz -o rqlite-v8.21.2-linux-amd64.tar.gz
tar xvfz rqlite-v8.21.2-linux-amd64.tar.gz
cd rqlite-v8.21.2-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.21.1
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.21.1 fixes a small issue related to /readyz
responses. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.21.1/rqlite-v8.21.1-linux-amd64.tar.gz -o rqlite-v8.21.1-linux-amd64.tar.gz
tar xvfz rqlite-v8.21.1-linux-amd64.tar.gz
cd rqlite-v8.21.1-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.21.0
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.21.0 enhances the /readyz
check, giving you more information about node readiness. See the documentation for more information, and the CHANGELOG for full details on this release. Prebuilt binaries are available below in the Assets section.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.21.0/rqlite-v8.21.0-linux-amd64.tar.gz -o rqlite-v8.21.0-linux-amd64.tar.gz
tar xvfz rqlite-v8.21.0-linux-amd64.tar.gz
cd rqlite-v8.21.0-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.20.3
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.20.3 fixes a possible panic at query time. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.20.3/rqlite-v8.20.3-linux-amd64.tar.gz -o rqlite-v8.20.3-linux-amd64.tar.gz
tar xvfz rqlite-v8.20.3-linux-amd64.tar.gz
cd rqlite-v8.20.3-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.
v8.20.2
rqlite is a lightweight, distributed relational database, which uses SQLite as its storage engine. rqlite provides an easy-to-use, fault-tolerant store for your most important relational data. You can learn a lot more about rqlite at rqlite.io.
Release v8.20.2 adds minor improvements and fixes for possible bugs. See the CHANGELOG for full details on this release, and check out the Assets section below for prebuilt binaries.
Getting started
Check out the Quick Start guide.
To download and run a single rqlite node follow the directions below. It's also very easy to run a rqlite cluster -- you can learn more by checking out the documentation.
If you wish to build rqlite from source, check out this documentation.
Docker
Run a single node as follows:
docker pull rqlite/rqlite
docker run -p4001:4001 rqlite/rqlite
Check out the rqlite Docker page for more details on running nodes via Docker.
Linux
Builds for a variety of CPU architectures are available. See the Assets section below.
To download and start rqlite, execute the following in a shell.
curl -L https://github.com/rqlite/rqlite/releases/download/v8.20.2/rqlite-v8.20.2-linux-amd64.tar.gz -o rqlite-v8.20.2-linux-amd64.tar.gz
tar xvfz rqlite-v8.20.2-linux-amd64.tar.gz
cd rqlite-v8.20.2-linux-amd64
./rqlited ~/node.1
macOS
homebrew rqlite
Windows
rqlite can be built for Windows, and Windows compatibility is ensured via AppVeyor. However you may need to build a specific release yourself, though the top-of-tree build is available for download from AppVeyor. Check out the CI build for Windows for more details.