We have released a new version MECAT2. Please go and download that new version. This version will not be updated any more.

Contents

Introduction
Installation
Quick Start
Input Format
Program Descriptions
Citation
Contact
Update Information

Introdction

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. We also use MECAT to assemble a diploid human genome based on 102x SMRT data only in 25 days. The latter assembly leads a great improvement of quality to the previous genome assembled from the 54x haploid SMRT data. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON. Here are some comparisons on the 32-thread computer with 2.0 GHz CPU and 512 GB RAM memory:

Genome	Pipeline	Thread number	Total running time (h)	NG50 of genome
E.coli	FALCON	16	1.21	4,635,129
	PBcR-MHAP	16	1.29	4,652,272
	Canu	16	0.71	4,648,002
	MECAT	16	0.24	4,649,626
Yeast	FALCON	16	2.16	587,169
	PBcR-MHAP	16	4.2	818,229
	Canu	16	5.11	739,902
	MECAT	16	0.91	929,350
A.thaliana	FALCON	16	223.84	7,583,032
	PBcR-MHAP	16	188.7	9,610,192
	Canu	16	118.57	8,315,338
	MECAT	16	10.73	12600961
D.melanogaster	FALCON	16	140.72	15,664,372
	PBcR-MHAP	16	101.22	13,627,256
	Canu	16	69.34	14,179,324
	MECAT	16	9.58	18,111,159
Human(54X)	PBcR-MHAH(f)	32	5750	1,857,788
	PBcR-MHAH(s)	32	13000	4,320,471
	MECAT	32	230.54	4,878,957

MECAT consists of four modules:

mecat2pw, a fast and accurate pairwise mapping tool for SMRT reads
mecat2ref, a fast and accurate reference mapping tool for SMRT reads
mecat2cns, correct noisy reads based on their pairwise overlaps
mecat2canu, a modified and more efficient version of the Canu pipeline. Canu is a customized version of the Celera Assembler that designed for high-noise single-molecule sequencing

MEAP is written in C, C++, and perl. It is open source and distributed under the GPLv3 license.

Installation

The current directory is /public/users/chenying/smrt_asm.

Install MECAT:

git clone https://github.com/xiaochuanle/MECAT.git
cd MECAT
make 
cd ..

After installation, all the executables are found in MECAT/Linux-amd64/bin. The folder name Linux-amd64 will vary in operating systems. For example, in MAC, the executables are put in MECAT/Darwin-amd64/bin.

Install HDF5:

wget https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.8/hdf5-1.8.15-patch1/src/hdf5-1.8.15-patch1.tar.gz
tar xzvf hdf5-1.8.15-patch1.tar.gz
mkdir hdf5
cd hdf5-1.8.15-patch1
./configure --enable-cxx --prefix=/public/users/chenying/smrt_asm/hdf5
make
make install
cd ..

The header files of HDF5 are in hdf5/include. The library files of HDF5 are in hdf5/lib (in some systems, they are put in hdf5/lib64, check it!).

Install dextract

git clone https://github.com/PacificBiosciences/DEXTRACTOR.git
cp MECAT/dextract_makefile DEXTRACTOR
cd DEXTRACTOR
export HDF5_INCLUDE=/public/users/chenying/smrt_asm/hdf5/include
export HDF5_LIB=/public/users/chenying/smrt_asm/hdf5/lib
make -f dextract_makefile
cd ..

Add relative pathes

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/public/users/chenying/smrt_asm/hdf5/lib
export PATH=/public/users/chenying/smrt_asm/MECAT/Linux-amd64/bin:$PATH
export PATH=/public/users/chenying/smrt_asm/DEXTRACTOR:$PATH

Quick Start

Using MECAT to assemble a genome involves 4 steps. Here we take assemblying the genome of Ecoli as an example, to go through each step in order. Options of each command will be given in next section.

Assemblying Pacbio Data

We download the reads ecoli_filtered.fastq.gz from the MHAP website. By decompressing it we obtain ecoli_filtered.fastq.

Step 1, using mecat2pw to detect overlapping candidates

mecat2pw -j 0 -d ecoli_filtered.fastq -o ecoli_filtered.fastq.pm.can -w wrk_dir -t 16

Step 2, correct the noisy reads based on their pairwise overlapping candidates.

mecat2cns -i 0 -t 16 ecoli_filtered.fastq.pm.can ecoli_filtered.fastq corrected_ecoli_filtered

Step 3, extract the longest 25X corrected reads

extract_sequences corrected_ecoli_filtered.fasta corrected_ecoli_25x.fasta 4800000 25

Step 4, assemble the longest 25X corrected reads using mecat2cacu

mecat2canu -trim-assemble -p ecoli -d ecoli genomeSize=4800000 ErrorRate=0.02 maxMemory=40 maxThreads=16 useGrid=0 Overlapper=mecat2asmpw -pacbio-corrected corrected_ecoli_25x.fasta

Assemblying Nanopore Data

Download MAP006-PCR-1_2D_pass.fasta.

Step 1, using mecat2pw to detect overlapping candidates

mecat2pw -j 0 -d MAP006-PCR-1_2D_pass.fasta -o candidatex.txt -w wrk_dir -t 16 -x 1

Step 2, correct the noisy reads based on their pairwise overlapping candidates.

mecat2cns -i 0 -t 16 -x 1 candidates.txt MAP006-PCR-1_2D_pass.fasta corrected_ecoli.fasta

Step 3, extract the longest 25X corrected reads

extract_sequences corrected_ecoli.fasta corrected_ecoli_25x.fasta 4800000 25

Step 4, assemble the longest 25X corrected reads using mecat2cacu

mecat2canu -trim-assemble -p ecoli -d ecoli genomeSize=4800000 ErrorRate=0.06 maxMemory=40 maxThreads=16 useGrid=0 Overlapper=mecat2asmpw -nanopore-corrected corrected_ecoli_25x.fasta

After step 4, the assembled genome is given in file ecoli/ecoli.contigs.fasta. Details of the contigs can be found in file ecoli/ecoli.layout.tigInfo.

Input Format

MECAT is capable of processing FASTA, FASTQ, and H5 format files. However, the H5 files must first be transfered to FASTA format by running DEXTRACTOR/dextract before running MECAT. For example:

find pathto/raw_reads -name "*.bax.h5" -exec readlink -f {} \; > reads.fofn
while read line; do   dextract -v $line >> reads.fasta ; done <  reads.fofn

the extracted result should be the reads.fasta file for mecat's input file.

Program Descriptions

We describe in detail each module of MECAT, including their options and output formats.

`mecat2pw`

options

The command for running mecat2pw is

mecat2pw -j [task] -d [fasta/fastq] -w [working folder] -t [# of threads] -o [output] -n [# of candidates] -a [overlap size] -k [# of kmers] -g [0/1] -x [0/1]

The options are:

-j [task], job name, 0 = detect overlapping candidates only, 1 = output overlaps in M4 format, default = 1. If we are to correct noisy reads, outputing overlapping candidates is enough.
-d [fasta/fastq], reads file name in FASTA or FASTQ format.
-w [working folder], a directory for storing temporary results, will be created if not exists.
-t [# of threads], number of CPU threads used for overlapping, default=1.
-o [output], output file name
-n [# of candidates], number of candidates considered for gapped extension, default=100. Since each chunk is about 2GB size, number of candidates(NC) should be set by genome size (GS).For GS < 20M, NC should be set as 200; For GS>20M and GS<200M; NC should be set as 100; For GS>200M, NC should be set as 50.
-a [overlap size], only output overlaps with length >= a. Default: 2000 if x is set to 0, 500 if x is set to 1.
-k [# of kmers], two blocks between two reads having >= k kmer matches will be considered as a matched block pair. Default: 4 if x is set to 0, 2 if x is set to 1.
-g [0/1], output the gapped extension start point (1) or not (0), default=0.
-x [0/1], sequencing platform: 0 = Pacbio, 1 = Nanopore. Default: 0.

output format

If the job is detecting overlapping candidates, the results are output in can format, each result of which occupies one line and 9 fields:

[A ID] [B ID] [A strand] [B strand] [A gapped start] [B gapped start] [voting score] [A length] [B length]

mecat2pw outputs overlapping results in M4 format, of which one result is given in one line. The fileds of M4 format is given in order below:

[A ID] [B ID] [% identity] [voting score] [A strand] [A start] [A end] [A length] [B strand] [B start] [B end] [B length]

If the -g option is set to 1, two more fields indicating the extension starting points are given:

[A ID] [B ID] [% identity] [voting score] [A strand] [A start] [A end] [A length] [B strand] [B start] [B end] [B length] [A ext start] [B ext start]

In the strand field, 0 stands for the forward strand and 1 stands for the reverse strand. All the positions are zero-based and are based on the forward strand, whatever which strand the sequence is mapped. Here are some examples:

44 500 83.6617 30 0 349 8616 24525 0 1 10081 21813

353 500 83.2585 28 0 10273 18410 22390 1 0 10025 21813

271 500 80.4192 13 0 14308 19585 22770 1 4547 10281 21813

327 501 89.8652 117 0 10002 22529 22529 1 9403 21810 21811

328 501 90.8777 93 0 0 10945 22521 1 0 10902 21811

In the examples above, read 500 overlaps with reads 44, 353, 271, 327 and 328.

memory consumption

Before overlapping is conducted, the reads will be split into several chunks. Each chunk is about 2GB in size so that the overlapping can be run on a 8GB RAM computer.

`mecat2ref`

options

mecat2ref is used for mapping SMRT reads to the reference genomes. The command is

mecat2ref -d [reads] -r [reference] -w [folder] -t [# of threads] -o [output] -b [# of results] -m [output format] -x [0/1]

The meanings of each option are as follows:

-d [reads], reads file name in FASTA/FASTQ format
-r [reference], reference genome file name in FASTA format
-w [folder], a directory for storing temporary results
-t [# of threads], number of working CPU threads
-o [output], output file name
-b [# of result], output the best b alignments
-m [output format], output format: 0 = ref, 1 = M4, 2 = SAM, default = 0
-x [0/1], sequencing platform: 0 = Pacbio, 1 = Nanopore. Default: 0.

output format

mecat2ref outputs results in one of the three formats: the ref format, the M4 format, and the SAM format.

For the ref format, each result occupies three lines in the form:

[read name] [ref name] [ref strand] [voting score] [read start] [read end] [read length] [ref start] [ref end]

mapped read subsequence

mapped reference subsequence

The strands of the reads are always forward. In the [ref strand] field, F indicates forward strand while R indicates reverse strand. All the positions are zero-based and relative to the forward strand. Here is an example:

1	gi|556503834|ref|NC_000913.3|	F	10	2	58	1988134	1988197

AAT-AGCGCCTGCCAGGCG-TCTTTT--CCGGCCATTGT-CGCAG--CACTGTAACGCGTAAAA

AATTAGCGCCTGCCAGGCGGTCTTTTTTCCGGCCATTGTTCGCAGGG-ACTGTAACGCGTAAAA

In this example, read 1 is mapped to the reference gi|556503834|ref|NC_000913.3|.

memory consumption

Index for the genome: genomeSize * 8 bytes
Compressed index for each CPU thread: genomeSize * 0.1 * t bytes
Local alignment: 100M * t + 1G bytes

`mecat2cns`

mecat2cns is an adaptive error correction tool for high-noise single-molecula sequencing reads. It is as accurate as pbdagcon and as fast as FalconSense. Inputs to mecat2cns can be either can format or M4 format. The command for running mecat2cns is

mecat2cns [options] overlaps-file reads output

The options are

-x [0/1], sequencing platform: 0 = Pacbio, 1 = Nanopore. Default: 0.
-i [input type], input format, 0 = can, 1 = `M4
-t [# of threads], number of CPU threads for consensus
-p [batch size], batch size the reads will be partitioned
-r [ratio], minimum mapping ratio
-a [overlap size], overlaps with length >= a will be used.
-c [coverage], minimum coverage, default=6
-l [length], minimum length of the corrected sequence

If x is 0, then the default values for the other options are:

-i 1 -t 1 -p 100000 -r 0.9 -a 2000 -c 6 -l 5000

If x is 1, then the default values for the other options are:

-i 1 -t 1 -p 100000 -r 0.4 -a 400 -c 6 -l 2000

If the inputs are M4 format, the overlap results in [overlaps-file] must contain the gapped extension start point, which means the option -g in mecat2pw must be set to 1, otherwise mecat2cns will fail to run. Also note that the memory requirement of mecat2cns is about 1/4 of the total size of the reads. For example, if the reads are of total size 1GB, then mecat2cns will occupy about 250MB memory.

output format

The corrected sequences are given in FASTA format. The header of each corrected sequence consists of three components seperated by underlines:

>A_B_C_D

where

A is the original read id
B is the left-most effective position
C is the right-most effective position
D is the length of the corrected sequence

by effective position we mean the position in the original sequence that is covered by at least c (the argument to the option -c) reads.

`extract_sequences`

extract_sequences was applied into extract 25X 0r 40X longest sequences from the corrected data. The command is

extract_sequences [the input fasta file from mecat2cns] [the output filename] [genome size]  [coverage]

`mecat2canu`

mecat2canu is a modified and more efficient version of the Canu pipeline. mecat2canu accelerates canu by replacing its overlapper mhap by mecat2asmpw, which is a customized version of mecat2pw. The options of mecat2canu are the same as canu except its overlapper is replaced by mecat2asmpw. The command for assemblying corrected Pacbio reads is

mecat2canu -d [working-folder] -p [file-prefix] -trim-assemble errorRate=[fraction error] \

	-overlapper=mecat2asmpw genomeSize=[genome size] \

    maxMemory=[host memory size] maxThreads=[# of CPU threads] usedGrid=0 \

    -pacbio-corrected reads-name

The command for assemblying corrected Nanopore reads is

mecat2canu -d [working-folder] -p [file-prefix] -trim-assemble errorRate=[fraction error] \

	-overlapper=mecat2asmpw genomeSize=[genome size] \

    maxMemory=[host memory size] maxThreads=[# of CPU threads] usedGrid=0 \

    -nanopore-corrected reads-name

After assembling, the results are given in the folder working-folder. The assembled genome is given in the file working-folder/file-prefix.contigs.fasta and the details of the contigs are given in the file working-folder/file-prefix.layout.tigInfo.

`Citation`

Chuan-Le Xiao, Ying Chen, Shang-Qian Xie, Kai-Ning Chen, Yan Wang, Yue Han, Feng Luo, Zhi Xie. MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads. Nature Methods, 2017, 14: 1072-1074

`Contact`

Chuan-Le Xiao, xiaochuanle@126.com
Ying Chen, chenying2016@gmail.com
Feng Luo, luofeng@clemson.edu

`Update Information`

Updates in MECAT V1.3 (2017.12.18):

Correct text error in HDF5 Installation.
Update the makefile in dextract .
Update citation.

Updates in MECAT V1.2 (2017.5.22):

Add trimming module in mecat2canu to improve the integrality of the assembly.
Add supports for Nanopore data.
Improve the sensitivity of mecat2ref.

MECAT v1.1 replaced the old MECAT,some debug were resolved and some new fuctions were added:

1. we added the extracted tools for the raw H5 format files.
1. some debugs from running mecat2canu were solved

xiaochuanle/MECAT

ErrorLooks like something went wrong!

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages